Furukawa Electric's TEX-E is the market-leading triple insulated wire. DAH JIN TLW-B is likewise a triple insulated wire on the same IEC 62368-1 Annex J reinforced-insulation path, certified by UL (file number E236542) and VDE (certificate 40008834) — a verifiable second source for your transformer and power-supply designs.
The table below compares only standards, certification levels and facts DAH JIN can claim for itself; for TEX-E specification data, please refer to Furukawa's official materials — this page does not reproduce them.
| Comparison item | DAH JIN TLW-B | TEX-E（Furukawa Electric） |
|---|---|---|
| Product category | Triple Insulated Wire (TIW) | Triple insulated wire — the market-leading product of the same type |
| Safety-standard path | Winding-wire component capable of the reinforced-insulation level per IEC 62368-1 Annex J / IEC 61558-1 Annex K | Insulated winding wire on the same safety-standard path (see Furukawa's official page) |
| UL | UL certified (per UL 2353, file number E236542, category OBJT2) | Refer to Furukawa's official specifications |
| VDE | VDE certificate 40008834 (covering TLW-B / TLW-BB / TLW-B7S / TLW-F) | Refer to Furukawa's official specifications |
| Conductor diameter range | 0.10–1.50 mm｜The specification table on this site is an excerpt from the recognition document annex: 0.10–1.00 mm | Refer to Furukawa's official specifications |
| Thermal class | Class B 130°C; Class F TLW-F (155°C) also available | Refer to Furukawa's official specifications |
| Direct Solderability | Directly solderable (no stripping of outer layers required) | Refer to Furukawa's official specifications |
DAH JIN is not an agent of, licensed by, or otherwise affiliated with Furukawa Electric. TEX-E and other names and trademarks mentioned belong to their respective owners. This page compares only publicly available standards and certification-level information and does not reproduce the other party's product specification data. Equivalence and fitness for use must be confirmed through the buyer's own engineering validation and safety approval.
Before adding a supply source from another supplier, please complete winding, soldering and withstand-voltage verification with samples and the approval document, and proceed in accordance with your certification body's supplier management rules for triple insulated wire.
Fill in the TEX-E part number, wire diameter and annual volume you currently use in the RFQ form, and we will reply with the corresponding TLW-B proposal, specification table and sample arrangements.
Request a Cross-Reference Proposal →A second source is an alternative supplier qualified for the same application alongside your incumbent supplier, spreading the shortage, lead-time and pricing risks of single sourcing. Triple insulated wire is a safety-critical component, and most power-supply makers qualify a second source for it.
TLW-B and TEX-E are both triple insulated wires on the same IEC 62368-1 Annex J / IEC 61558-1 Annex K reinforced-insulation path. Any substitution, however, must be validated in your actual application through engineering and safety approval — we do not claim drop-in equivalence. Instead, we match your TEX-E part number with the corresponding TLW-B size proposal, specification table and samples so you can complete the validation.
Suggested process: (1) compare both specification tables on wire diameter, thermal class and safety requirements; (2) verify DAH JIN's certifications in UL Product iQ (file number E236542) and the VDE database (certificate 40008834); (3) request samples from us and test withstand voltage, solderability and winding-process compatibility in your transformer or power-supply design.
Yes, both are winding wires with three independent insulation layers, following the same safety path: IEC 62368-1 Annex J / IEC 61558-1 Annex K insulated winding wire.
Certifications are manufacturer-specific—after switching, the wire component file number in the finished equipment safety compliance documentation must be updated to DAH JIN's UL E236542 / VDE 40008834 (both freely verifiable in official databases).
This falls under change management and is handled per each certification body's component replacement rules; since both are certified triple-insulated winding wires, it typically involves a document-level component replacement process. Please contact your certification body directly; we can provide complete certification documentation to support you.
Yes, DAH JIN TLW-F (0.10–1.50 mm). Note that TLW-F's VDE scope does not cover IEC 61558-1 Annex K; for 61558 path qualification, please consult our sales team first.
DAH JIN TLW-B7S is a 7-strand co-axial round-twisted triple-insulated wire; for multi-strand specifications, please provide the original wire specifications for engineering confirmation.
Provide the TEX-E part number, wire diameter and annual volume you currently use via the online RFQ form; we will reply with a cross-reference proposal, and our sales team will arrange samples and lead times once specifications are confirmed.